Konica Minolta bizhub 4750 - Manual (Page 112)

[Applied Functions] 3-7
3.2 Using LPR/Port9100 connection for installation 3
11
Follow the on-screen instructions to carry out operations.
% If the [User Account Control] window appears, click [Continue] or [Yes].
12
Click [Finish].
13
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] or [Devices and Printers] window.
14
Remove the CD-ROM from the CD-ROM drive.
Installation of the printer driver is then completed.
3.2.2 Installing the printer driver by creating a new port
In Windows 8/8.1/Server 2012/Server 2012 R2
The procedure for installing the printer driver by creating a new port is as follows:
0 Administrator privileges are required to perform this task.
0 Since the printer is searched for during the installation, be sure to connect this machine to the network
before turning it on.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
2
Display the printer window.
% In Windows 8.1, click [ ] in the Start window, then click [Control Panel] - [Hardware and Sound] -
[View devices and printers].
% In Windows 8, right-click the Start window, then click [All apps] - [Control Panel] - [Hardware and
Sound] - [View devices and printers].
% In Windows Server 2012/Server 2012 R2, open the Start window, then click [Control Panel] - [Hard-
ware] - [View devices and printers].
3
Select Add a printer.
4
In the window showing the detected printer, click [The printer that I want isn't listed].
5
Click [Add a local printer or network printer with manual settings].
6
Click [Create a new port:], then select [Standard TCP/IP Port].
7
Click [Next].
8
Select [TCP/IP Device], then enter the IP address.
9
Click [Next].
10
Click [Have Disk...].
11
Click [Browse...].