Texas Instruments 4000M - Manual (Page 47)

Set ting Up a Non MS- DOS Env ironment
To install an operating system other than MS-DOS, you
must complete the following steps:
1. At the MS-DOS prompt, press FN+ESC or type
C:\UTILS\SET_UP.EXE
The Setup Program appears.
2. Press FN+PGDN to go to the page that displays
Advanced OS Power: ON.
3. Using the Up and Down arrow keys, select the
Advanced OS Power field.
4. Using the Left and Right arrow keys, select the word
OFF.
5. Press ESC.
6. Press F4 to save the change.
The system reboots.
7. Continue loading your operating system according to
documentation that came with your software. For any
additional drivers, call 1-800-TI-TEXAS.
Setting Up a Non MS-DOS Environment
Installing and Using Applications 2-15