Texas Instruments 4000M - Manual (Page 216)

Opt ions
The following optional features can be purchased for the
CD-ROM portable docking system:
❑ SCSI 2.5" Hard Drive Enabler kit - TI Part No.
9793373-0001
❑ Spare AC Adapter - TI Part No. 9793362-0001
❑ Battery Kit - TI Part No. 9793371-0001
❑ Brief Case - will hold the portable docking system
docked to a TM4000M notebook
❑ Battery Charger - TI Part No. 9793360-0001
❑ 50-Pin Centronix to 50-Pin Centronix Cable - TI Part
No. 9694704-0003
SCSI-II to 50-Pin Centronix Cable - TI Part No.
9694704-0002
SCSI Hard Drive Enabler Kit
The Portable CD-ROM Docking System includes an external
SCSI II connector. Using a special adapter with this
connector allows you to connect up to six external SCSI
devices.
The SCSI hard drive enabler kit (TI Part No. 9793373-0001)
can be used to place a SCSI drive in place of the battery on
the underside of the Portable CD-ROM Docking System. To
install the SCSI drive, complete the following steps:
1. Turn power off to both the notebook and Portable
CD-ROM Docking System and disconnect the power
cord.
2. Turn the system upside down on a padded surface.
The Portable CD-ROM Docking System may still be
clamped to the TravelMate TM4000M notebook.
Options
Portable CD-ROM Docking System 12-15