Texas Instruments 4000M - Manual (Page 13)

You should keep your System Recovery diskette updated
with your latest Windows configuration. To do this,
complete the following steps:
1. The first time you complete a new addition or change to
Windows (such as adding a new software icon),
manually copy all *.GRP and *.INI files to the first copy
of the System Recovery diskette. These files are
located in the C:\Windows directory.
2. The next time you complete a new addition or change to
Windows, you should manually copy over all of the
*.GRP and *.INI files to the second copy of the System
Recovery diskette.
3. After each subsequent change, you should alternate
making the backup of *.GRP and *.INI files to the first
and second copy of the System Recovery diskette.
Accessing Disk-Based Setup
This Setup program, which resides on the hard disk under
the
UTILS directory, defines all default and most
user-selectable parameters. Disk-based Setup contains
four screens, or pages, with onscreen prompts plus a
context-sensitive online help.
From the C:\> prompt, you can access Page 1 of disk-based
Setup in two ways:
❑ Press FN-ESC (SETUP)
❑ Type SET_UP and press ENTER.
After Setup has loaded, you can define parameters based
on the information in the online help or in this chapter
.
Accessing the Setup Programs
Using the Setup Programs 1-5