F10 setup key, Function key commands – Texas Instruments 4000M User Manual
Page 129
n
Note: Do not use the Go function to execute a terminate-
and-stay-resident (
TSR
) program.
LFM
cannot reload itself
when you exit the
TSR
program, and it displays an error
message. The
MS-DOS
program is an example. If you
intend to use
, install it in your
AUTOEXEC.BAT
file so
the resident portion of
will load when you start the
computer.
F10 Setup Key
Pressing F10 at the
LFM
main menu causes
LFM
to display
a Setup Commands menu at which you can select one of
three submenus described in this section to configure
LFM
operating features.
Pressing F1 causes
LFM
to display a Help screen describing
the setup functions.
When you complete your changes to each menu, press ESC
to return to the Setup Commands menu. Then press ESC
again and answer the “Save changes?” prompt to return to
the
LFM
main menu.
Function Key Commands
7-12 Laptop File Manager