ADTRAN TSU 600 - Manual (Page 79)

Chapter 3. Operation
61200.076L2-1 TSU 600 User Manual 67
With the cursor on 3)REVIEW press Enter or number 3
to display the first of the assigned ports with the
quantity of DS0s. See Figure 3-17. Use scroll to move
through the displays.
Selected Port
Quantity of DS0s
Figure 3-17
Selected Port and Quantity of DS0s
Continue with standard operation procedures to exit
the menu.
REVIEW TEMP
This menu item is operated the same for the TEMP
map as is 3)REVIEW MAP A or Map B.
EDIT TEMP
The map in the TEMP file can be edited to whatever
configuration is desired. If Map A had been copied
into the TEMP file, then after editing, the TEMP file
could be applied to MAP A or MAP B.
With the cursor on 5)EDIT TEMP, press Enter to
display the selection screen with the cursor on the first
DS0 number. The menu displays are identical to
2)CREATE TEMP with the exception that the existing
values (for Passthru and Port Select) are displayed.
Complete the editing of the scratch file the same as for
2)CREATE TEMP.