ADTRAN TSU 600 - Manual (Page 47)

Chapter 2. Installation
61200.076L2-1 TSU 600 User Manual
35
No Passcode Desired
At the New Passcode prompt (in the Set Passcode
menu), press Enter without any numerical entry. The
system nullifies the need to enter a password for
subsequent use and proceeds to the Unit ID prompt.
Set Unit Identification
The Unit ID sets the unit to respond to remote control
(controlled by a device other than the front panel). If
no Unit ID is recorded it is not possible to operate
from any remote control device, including the local
PC.
To Set the Unit Identification
In the Unit ID menu (item 4) under the UTIL menu,
enter any value between 2 and 250. The number 1 is
reserved for the PC.
Pressing Enter records the Unit ID number and
establishes its availability for operation by remote
control. The unit proceeds to the Set Control Port
prompt.
No Unit ID Desired
Without entering any numbers at the Unit ID prompt,
press Enter. Pressing Enter with no Unit ID recorded
establishes the unit as not able to be operated by
remote control.