Scenario 1: upgrading from imageultra builder 3.1 – Lenovo ThinkVantage ImageUltra Builder Version 5.0 User Manual
Page 67
1.
Open ImageUltra Builder.
2.
Make sure the ImageUltra Builder Server is running.
To access the ImageUltra Builder Server:
a.
Open Windows Explorer.
b.
Open the Program files folder on your main drive.
c.
Select the IBM folder, then select the Cloudscape_10.0 folder.
d.
Double-click StartCloudscape.cmd.
3.
Select Tools from the top menu bar, then select Administration from the
drop-down menu.
4.
Select or type in the ImageUltra server name that you want to log on to.
5.
Type the user name Admin and the default password pwd.
6.
Click Login, then click Administer users from the What would you like to
do?
menu.
7.
Click Change a user, then click Admin, then click Change the password.
8.
Type a new password that is less than 20 characters long in the Type a new
password
field, then retype the password in the Type the new password
again to confirm
field.
Note:
Passwords are case-sensitive.
9.
Click Change Password.
10.
The "What do you want to change about Admin"screen reappears. Your
password has been successfully changed.
Upgrading from a previous version of ImageUltra Builder
There are two scenarios in upgrading from a previous version of ImageUltra
Builder.
Scenario 1: Upgrading from ImageUltra Builder 3.1
Scenario 2: Upgrading from ImageUltra Builder 4.0 or 4.01
Scenario 1: Upgrading from ImageUltra Builder 3.1
Use the following procedure to upgrade from ImageUltra Builder 3.1:
Note:
To ensure that repositories created using earlier versions of ImageUltra
Builder can run on ImageUltra Builder 5.0, be sure to install Cloudscape
somewhere on your computer.
1.
Insert the ImageUltra Builder DVD into the DVD drive of the computer that
will be used as the ImageUltra Builder console. In most cases the installation
program will start automatically. If the installation program does not start
automatically, complete the following procedure:
a.
Click Start.
b.
Click Run.
c.
Type x:\SETUP.EXE where x is the letter of your DVD drive.
d.
Click OK.
2.
Follow the instructions on the screen.
Chapter 4. Installing the ImageUltra Builder program
53