Staging-area logic – Lenovo ThinkVantage ImageUltra Builder Version 5.0 User Manual
Page 56

Staging-area logic
Because various conditions might exist on different target computers, the
ImageUltra Builder program uses built-in logic to ensure that a common Smart
Image can be used across a wide range of computers. Varying conditions include:
v
Support or the lack of support for an HPA in the BIOS
v
The presence or absence of an HPA
v
The presence or absence of a service partition
The following table shows how the deployment behavior changes on a Lenovo
branded computer based on conditions that exist before the image is deployed.
Notes:
1.
The use of driver maps and the use of device driver modules from either the
service partition or HPA is limited to Portable-Sysprep Images and
Ultra-Portable Images.
2.
You also can use the following table to determine the behavior for a
direct-network install that specifies the use of a service partition for
console-side recovery purposes.
Table 4. Staging-area behavior - Lenovo branded computers
Conditions on a Lenovo branded target computer prior to deployment
Maps deployed
Service partition
present
Description
Result from
deployment
Base map and driver map
Service partition - Front
Yes - Front
v
Create new service
partition at the
front of the hard
disk drive.
v
Move the
necessary modules
from the existing
service partition to
the new partition.
v
Delete the old
service partition.
v
Deploy the image.
v
Delete all
unnecessary
modules and files
from the service
partition. Preserve
any Rapid Restore
files or Rescue and
Recovery files that
might exist.
v
Resize the service
partition, if required.
v
Deploy the Smart
Image as defined by
the base and driver
maps to the service
partition.
Service partition - Front
Yes - Back
Service partition - Back
Yes - Front
Service partition - Back
Yes - Back
Base map and driver map (Front or back)
No
N/A
v
Create the service
partition in the front
or at the back,
depending on the
base map.
v
Deploy the Smart
Image as defined in
the base and driver
maps to the service
partition.
Base map only
42
ImageUltra Builder Version 5.0: User Guide