Lenovo ThinkVantage ImageUltra Builder Version 5.0 - Manual (Page 212)

Width Specifies the width of the message box dialog. If values
are not specified for both Width and Height, the
message box window is auto-sized based on the
message text.
Default: none
Height Specifies the height of the message box window. If
values are not specified for both Width and Height, the
message box window is auto-sized based on the
message text.
Default: none
Timer Specifies the pace, in seconds, at which the position of
the message box dialog is changed.
Default: 1
BkgndImage Specifies the path of a Windows bitmap (.bmp) file to
be displayed within the background of the message
box dialog.
Default: none
BkgndImagePos Specifies the location of the message box dialog’s
background image. The value of this setting is one
horizontal position value (LEFT, RIGHT, or CENTER)
and one vertical position value (TOP, CENTER, or
BOTTOM) separated by a space (e.g., RIGHT
BOTTOM). Default: RIGHT BOTTOM
1 Color values may be specified as named values supported by MS Internet Explorer (e.g.,
RED, FUSCHIA, PINK, etc.); as RGB triplets (e.g., FF0000); or as the user-defined system
settings i.e., ACTIVEBORDER, ACTIVECAPTION, APPWORKSPACE, BACKGROUND,
BUTTONFACE, BUTTONHIGHLIGHT, BUTTONSHADOW,BUTTONTEXT,
CAPTIONTEXT, GRAYTEXT, HIGHLIGHT, HIGHLIGHTTEXT, INACTIVEBORDER,
INACTIVECAPTION, INACTIVECAPTIONTEXT, INFOBACKGROUND, INFOTEXT,
MENU, MENUTEXT, SCROLLBAR, THREEDDARKSHADOW, THREEDFACE,
THREEDHIGHLIGHT, THREEDLIGHTSHADOW, THREEDSHADOW, WINDOW,
WINDOWFRAME, WINDOWTEXT).
The text file identifies the message box dialog’s title and message. (These values are
separated from the settings file to facilitate national language support). This file is in the
format of a Windows INI file, as shown below:
[MsgBox]
Title=
Text=
Title Message box dialog’s caption text
Text Message box dialog’s message text
Sending debug data to the technical support team
If you need assistance in debugging a problem, zip the entire \IUTEMP folder in
the staging area and the \IUWORK folder in the user partition. You can use the
PKZIP25 or your own ZIP program for the following task:
198 ImageUltra Builder Version 5.0: User Guide