Revision index, Evision index, 12 r – Norgren VS18 Series Valve Advantage User Manual
Page 97
VS18/VS26
MAINTENANCE & INSTRUCTION BOOKLET
12 R
EVISION INDEX
Revision Date
Comments / Revisions
A March
2004
B
July 2004
4.3.1: Values of 5/2 Sol (priority side 14)/Sol added
5.1.5: Section of valve identification labels added
5.1.10: Tightening torques of blue coated screws changed
8.2.1: D-Sub 9-pin = IP40
8.3.1: Pin assignment (Pin 2 + 3) changed
8.3.8: stroke a passage out -> only one EDS file available
8.4.1: Pin assignment (Pin 2 + 3) changed
8.4.3: Address settings changed
8.4.8: stroke a passage out -> only one EDS file available
8.5.1: D-Sub 9-pin = IP65, Pin assignment Female (Pin 5 + 9) changed
8.6.3: Default addresses added
8.6.6: Setting of DIP switches of configuration switch changed
10.3.4: Declaration of conformity available and added
11: Information
added
Div.:
Added note concerning correspondence of part number and valve
island configuration when changing valves or accessories
Div.:
Tightening torques in Ibs added (only in English version)
2005
7.3.1: New design: drawings and screw types changed,
screw driver speed corrected
Variant with M23 connector added
8.1.5: Assembly of FD67 bus added
8.3.1, 8.4.1:
Pin assignment of power connector added
8.5.7: Interbus-S ID and length codes changed
8.7:
Section of FD67 bus added
D
June 2005
Material of some VS sandwich plate bodies changed from die cast
aluminium to moulded plastic
Data of 2x2/2 valves added
5.1.4, 5.1.10, 5.1.11, 5.2.2, 9.2: Use of U-washers is no longer necessary
8.7, 8.7.5:
CANopen added
of
I
max
corrected
Information adjusted
added
E
May 2007
4.3.5, 4.5.6, 4.5.7, 5.1.14, 8.7.10:
Section added
4.4.3, 6.1.1, 7.1.1, 8.1.1: “UL Class 2 Supply only” added
5.1.2: Text “Valve mounting screws” added
5.1.4, 5.1.11, 9.2: Tightening torque of valve mounting screws adjusted
5.1.10: Exchange of valve mounting screws no longer necessary
5.1.4, 5.1.10, 5.1.11, 5.2.2, 9.2: Use of U-washers for VS26 still necessary
5.2.2: Spare part no of valve mounting screws adjusted
7.1, 7.2:
Information about max. no of valve stations adjusted
7.2.2: Footnote at 44-pin assignment added
8:
Section about AB RIO deleted, AB RIO is no more available
8.2.4: Default setting of configured output bytes specified
8.3.1, 8.4.1: Pin assignments adjusted
VS2672926-KG00E_05/07 Page
97/97