Electrical, Voltage tolerances, Required performance of power supply unit – Norgren VS18 Series Valve Advantage User Manual
Page 12: Power supply and precautions, Lectrical, For information on power supply and earth
VS18/VS26
MAINTENANCE & INSTRUCTION BOOKLET
4.4 E
LECTRICAL
4.4.1 Voltage
tolerances
Voltage
Voltage tolerances
24V DC
+/-10%
115V AC
-10%/+15%
4.4.2 Required performance of power supply unit
The required performance can be calculated from the maximum number of energized solenoids
at the same time. In case of a Fieldbus valve island the consumption of power of the electronic
has to be considered (see section
4.4.3 Power supply and precautions
All VS18/VS26 24V DC products are designed to be used with a protective extra low voltage
(PELV) power supply (UL Class 2 Supply only).
All VS18/VS26 115V AC products correspond to the protection class I. Connection of the
protective earth (PE) ground is required.
VS2672926-KG00E_05/07 Page
12/97