Norgren KIP 1 Series - Manual

7-6
KIP Coils
7
www.norgren.com/fluid
U 2 4 0 1 1 5 - 0 2 5 1 - 24VDC*
Coils
All standard KIP valves are supplied with a Class “B” dry tape wound
coil construction with 24" black leads, P/N (01) in the ordering
system, unless otherwise specified.
When using this chart below note the available housing styles and
the series in which coils are available.
The following chart shows all coil options readily available, for other
options in OEM quantities consult KIP. Non-standard voltages,
leadwire lengths, other lead wire types and colors, may require
minimum quantities.
KIP standard voltages:
12VDC, 24VDC, 24/60, 120/60, 110/50, 220/50, 240/60.
Lead wire type -
AWG 20 on Series 1 and 2
AWG 18 on Series 1 and 2 with free standing molded coil
AWG 18 on Series 3 and 6
Coil classification -
Class B = 130° C or 266° F
Class F = 155° C or 311° F
Class H = 180° C or 356° F
* For Class F coils change the second digit to a 2. Consult KIP for minimum order quantities.
** For Class H coils change the second digit to a 3. Consult KIP for minimum order quantities.
*** Full wave rectification
Number Housing Series Type Class
01 1 - Grommet 1, 2, 3, 6 Standard - dry tape wrapped with leads B**
01 2 - Conduit 1, 2, 3, 6 Standard - dry tape wrapped with leads B**
41 9 - Slotted 1 Free standing molded with leads B**
61 9 - Slotted 2, 3, Free standing molded with leads B**
61 3 - Yoke 2, 3 Free standing molded with leads B**
41 2 - Conduit 1, 2, 3 Potted with leads B**
31 9 - Slotted 2, 3 3/16" Vertical spade B**
51 9 - Slotted 2, 3 1/4" Vertical spade B**
51 3 - Yoke 2, 3 1/4" Top spade (Available with FWR option***) B**
41 1 - Grommet 6 Free standing molded with leads B**
41 2 - Conduit 6 Free standing molded with leads B**
51 9 - Slotted 6 1/4" Vertical spade B**