Norgren VS18 Series Valve Advantage - Manual (Page 75)

VS18/VS26 MAINTENANCE & INSTRUCTION BOOKLET
8.5.8 Interbus-S commissioning
Due to the increasing number of compatible Interbus-S master controllers it would be
impossible to create detailed instructions for commissioning the Norgren node on a particular
master. All Norgren Interbus products are conformance tested to the latest specification by an
independent authorised test site and are fully certified by the Interbus Club. Because of this, the
help guide and manual supplied with the users chosen PLC should be used during the
commissioning stages of each Norgren node.
8.5.9 Interbus-S valve island expansion
The modular design of the VS18/VS26 valve island allows easy modifications to the number of
valves while in the field. The system allows single station expansion for up to 4 valve stations.
For more information please refer to section
9 .
The VS18/VS26 Interbus-S valve islands may have to be reconfigured after expansion to accept
the new number of valves. This is controlled by the DIP switch on the Fieldbus PCB (see
section
8.5.7 ).
8.5.10 More information on Interbus-S
Interbus Club: Interbus Basics
Web sites
www.interbusclub.com Interbus Club Organisation
VS2672926-KG00E_05/07 Page 75/97