Norgren ISO Star Series Valves - Manual

Valves
www.norgren.com/usa
VAL- 146
ISO Star Series Valves
5/2 and 5/3 solenoid and air pilot actuated valves
NITUFF® coated non-corrosive spool and sleeve
for long trouble free life (100 million plus cycles)
Integral flow controls for cylinder speed control on
size #1, and #2 models
Low power solenoids with manual override options
End and CNOMO solenoid pilots
Base mounted soft start valves available
Minimal maintenance
Technical Data
Medium:
Compressed air, 40µm filtered, lubricated or non-
lubricated
Operation:
Glandless spool valve, solenoid pilot or air pilot
actuated
Mounting:
On sub-bases
Sizes:
#1, #2, #3
Operating Pressure:
Maximum pressure
145 psig (10 bar) solenoid pilot actuated valves with
internal pilot supply
232 psig (16 bar) solenoid pilot actuated valves with
external pilot supply
232 psig (16 bar) air pilot actuated valves
Flow Characteristics (unregulated):
Size Cv l/min
#1 1.2 5.5
#2 2.4 10.7
#3 4.4 17.9
Ambient Temperature:
5°F* to 122°F (–15°C to 50°C) solenoid pilot actuated
valves
5°F* to 176°F (–15°C to 80°C) air pilot actuated valves
*Consult our Technical Service for use below 36°F (2°C)
Materials:
Die cast aluminum body. Hard anodized, Teflon coated,
matched aluminum spool and sleeve. Viton and nitrile
rubber seals. Zinc die cast locking plate. POM plastic
parts. Zinc plated screws. Brass flow regulators.
Ordering Information
To order select model number, add voltage code and connector code, e.g. SXE
0573-A60-00/13JB for a 5/2 double end solenoid pilot size #1 valve with internal
pilot air supply, integral flow regulators, shrouded push button lockable manual
override, 22 mm coil 24V d.c. with cable grip connector.
5/2
5/3
All ports blocked mid position
5/3
Center open exhaust mid position
5/3
Center open pressure mid position