Norgren C/146200 LINTRA PLUS - Manual

Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
3/10 N/us 1.6.009.01
Technical data
Medium:
Compressed air. filtered.
lubricated or non-lubricated
Operation:
C/146000/M, C/146100/M, C/146200/M
Double acting with adjustable cushioning
and magnetic piston
Models:
C/146000 with internal guide
C/146100 with external adjustable guide
C/146200 with precision roller guide
Operating pressure:
14.5 to 116 psi (1 to 8 bar)
Operating temperature:
-22°F to 176°F (-30°C to +80°C) max.
(consult our Technical Service for use below 36°F [+2°C])
Cylinder diameter:
16, 20, 25, 32, 40, 50, 63, 80 mm
Max strokes:
Ø 16 to 40 mm: 27.9' (8500 mm)
Ø 50 and 63 mm: 26.2' (8000 mm)
Ø 80 mm: 18' (5500 mm)
Materials:
End covers: aluminum diecast, molded plastic (Ø 16) and
anodized aluminum (Ø 20 & 80)
Yoke: anodized aluminum, molded plastic (Ø 16 & 20)
Carriage, closer & cover: aluminum diecast
Guiding bridge and profile barrel: anodized aluminum
Seal strip, wiper and piston seal: polyurethane
Cover strip: polyamide
Other seals: nitrile rubber
C/146000, C/146100, C/146200
LINTRA ® PLUS rodless cylinders
Magnetic piston
Double acting
Ø 16 to 80 mm
New lightweight design extrusion
with universal mounting grooves
Proven and patented sealing system
Dust protection as standard (Ø 25 to 63 mm)
Interchangeability with series C/46000
Ordering example
see page 2
Mountings and switches
see page 3 & 4
Cylinder with linear position sensor
C/146000/F1
see page 2 & 20
Magnetic piston