Norgren Air Solenoid Accessory Pack User Manual
Air solenoid accessory pack
6/11
N/US
5.4.405.01
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
Air Solenoid Accessory Pack
3/2 valve with 3/8" inlet to 1/4" outlet
Robust modular 3-way valve manifolding system
Patented design provides flexibility to exceed your
application needs
Customizable electrical connection to meet your
specific requirements
Integrated fittings provide faster build times
Quicker installation with color coded fittings caps
Simple to connect design for building the manifold
length you require
Mountable in any orientation
Technical Data
Medium:
Compressed air, filtered, lubricated, non-lubricated
Operation:
3/2 normally closed direct acting
Solenoid:
9 - 16 VDC or 20.4 - 26.4 VDC
7 Watts
Port Size:
3/8" Inlet - tube/push in fitting (PIF)
1/4" Outlet/Delivery - tube/push in fitting (PIF)
Operation Pressure:
Maximum 150 psig (10.35 bar)
Flow Characteristics:
3/8" Inlet Cv = 0.67
1/4" Delivery Cv = 0.14
Minimum orifice size: 0.078"
Temperature Range:
-40° to 220°F (-40° to 100°C)
Materials of Construction
Body and endcaps: 30% glass filled PBT
Exhaust cover cap: 30% glass filled Nylon 6/6
Coil overmold: 15% glass filled PET
Seals: Silicone, Nitrile, Viton, and HNBR
Springs, armature, and pole piece: Stainless Steel
Bobbin: 30% glass filled PPS
Valve and fittings: Brass
Mounting sleeve: Steel
Tubing: Tubing should be to SAE J844
Standards and Legislation
Fittings comply with U.S. Department of Transportation, Federal
Motor Vehicle Safety Standard (DOT FMVSS 106) (Mandatory
requirements for inch tube fittings in U.S.A.), Society of Automotive
Engineers SAE J1409, SAE J1410, SAE J1455 and SAE J2494-2.
Typical applications
Commercial vehicles, truck and trailer
manufacturers, body builders:
Air horn
Inter wheel lock
Power take off (PTO)
Inner axle lock
5th wheel slide
Suspension dump
Inside/outside air
5th wheel release
Auxiliary axle
Options
Consult factory for variations, electrical and
wiring options.
Symbol