WIKA CPC3000 - Manual (Page 9)

Pneumatic High-Speed Pressure Controller CPC3000
WIKA Operating Instruction Pneumatic High-Speed Pressure Controller ∙ Version 1.1 9
11498171.01 08/2009 GB
Before pressurizing, the user must ensure through appropriate protective
measures that the system or the device will not be overpressurized. When
working with or on an instrument, safety glasses should be worn.
In areas where the system is operated there must be sufficient air ventila-
tion due to inert gases that will escape during use.
High pressure can accelerate parts in a manner that could be hazardous
and cause physical injury.
Additional warning and caution notes are included throughout this manual.
Warning