WIKA CPC3000 - Manual (Page 7)

Pneumatic High-Speed Pressure Controller CPC3000
WIKA Operating Instruction Pneumatic High-Speed Pressure Controller ∙ Version 1.1 7
11498171.01 08/2009 GB
1.4 Packaging for Shipment
If the product must be shipped to a different location or returned to WIKA for any reason
through a common carrier it must be packaged properly to minimize the risk of damage.
The recommended method of packing is to place the instrument in a container, surrounded on
all sides with at least 10 cm of shock attenuation material such as styrofoam peanuts.
2. Safety notices
2.1 User Responsibilities
To ensure safety, the user must make sure that:
The system is used properly (refer to 3.1 "Proper use" in the chapter 3. "Product descrip-
tion"), no dangerous media are used and that all technical specifications are observed.
Safety mechanisms exist, which exclude any danger to persons or machinery through
improper pressurisation.
The system is only operated in perfect operative condition.
This operation manual is legible and accessible to the user at the system's location.
The system is operated, serviced and repaired only by staff which is authorised and quali-
fied to do so.
The operator receives instruction on industrial safety and environmental protection, and is
knowledgeable of the operating instructions and the safety notices contained therein.
2.2 General safety notices
The system should only be operated by trained personnel who are familiar
with this manual and the operation of the instrument.
A condition for trouble-free and safe operation of this system is proper
transport, proper storage, installation, assembly and proper use as well as
careful operation and maintenance.
Any operation not described in the following instructions should be prohib-
ited.The system must be handled with the care required for an electronic
precision instrument (protect from humidity, impacts, strong magnetic
fields, static electricity and extreme temperatures). Do not insert any
objects into the instrument.
The system is powered via the power cable with a voltage that can cause
physical injury. Even after disconnecting the system from the power
supply, dangerous voltages can temporarily occur due to capacitance.






Warning
Caution