WIKA CPC3000 - Manual (Page 17)

Pneumatic High-Speed Pressure Controller CPC3000
WIKA Operating Instruction Pneumatic High-Speed Pressure Controller ∙ Version 1.1 17
11498171.01 08/2009 GB
4. Specifications
Specifications CPC3000
Pressure ranges bar -1 ... +70 (depending on sensor)
Pressure types Absolute, gauge or bi-directional ranges
Precision % FS < 0.015
Accuracy % FS < 0.025
Pressure units selectable and freely definable
Control stability % FS < 0.004
Slew rate sec. < 3 (with a sudden pressure increase of 10 % FS in a 150 ml test volume)
Control range % FS 0 up to 100
Test volume ccm 50 ... 1,000 (without throttle)
Pressure ports mm 4 ports with 7/16"- 20 F SAE. incl. 6 mm tube fitting adaptors
Filter elements 40 micron filter element included in each pressure port
Permissible pressure media clean dry non-corrosive gases
Wetted parts aluminium, brass, 316 and 316L stainless steel, Buna N, FPM/FKM,
glass filled epoxy, RTV, Nylon, Ceramic
Overpressure protection safety relief valve
Instrument version desk top/optional: incl. rack mounting kit
Screen 7.0" colour LCD with touch-screen
Resolution digits 4 ... 6
Internal measuring rate 1/sec 25
Display update 1/sec 4
Warm-up time min approx. 15
Digital Interface Ethernet, IEEE-488, USB
Command sentences Mensor, SCPI, others optional
Power Supply V AC 100 … 240, 50-60 Hz
Energy Consumption VA maximum 90
Permissible pressure
Supply port  % FS ~ 110
Measure/Control port  % FS max. 105
Permissible
Operating temperature  °C 10 … 50
Storage temperature  °C 0 ... 70
Air humidity  % 0 … 95 (relative humidity without moisture condensation)
Operating position  Horizontal or slightly tilted
Compensated temperature
range
°C 15 …. 45
Weight kg approx. 9.1
Dimensions mm see technical drawings
CE-mark Conformity certificate
Calibration* Incl. factory calibration certificate 3.1 per DIN EN 10 204
* Calibration in a horizontal position.