WIKA CPC3000 - Manual (Page 25)

Pneumatic High-Speed Pressure Controller CPC3000
WIKA Operating Instruction Pneumatic High-Speed Pressure Controller ∙ Version 1.1 25
11498171.01 08/2009 GB
Figure - Main Menu
Numeric keypad
- Delete selected set point
- Delete last entered digit
- Accept selected set point
User defined DUT / control range
limits (configurable via SETUP)
SETUP menu
Setpoint
Stable indication
Current pressure value
Pressure mode indication
Pressure unit key
Bar graph
MEASURE
Measure mode pneumatically con-
nects the pressure sensor directly
to the device under test. In meas-
ure mode pressure regulation is
inactive.
CONTROL
In the control mode, the device
regulates the pressure output
according to the set point value,
providing a precise pressure at the
test or measure port.
VENT
Vents the system and the device
under test to atmospheric pres-
sure.
Figure - Optional Elements
SETUP menu
The SETUP menu allows
access to the following tabs.
Display
Control
Remote
Info
Service 




SETUP menu
Pressure emulation
mode key
Communication
status*
JOG key pad selection tab
STEP key pad selection tab
Numeric key pad selection tab
Note: See the following page for detailed information on
each set point entry screen.
Optional barometric
reference display*