Pneumatic high-speed pressure controller cpc3000 – WIKA CPC3000 User Manual

Page 5

Pneumatic High-Speed Pressure Controller CPC3000

WIKA Operating Instruction Pneumatic High-Speed Pressure Controller ∙ Version 1.1

11498171.01 08/2009 GB

1. General notices

In the following chapters detailed information on the pneumatic high-speed pressure control-
ler model CPC3000 and its proper use can be found.

Should you require further information, or should there be problems which are not dealt with
in detail in the manual, please contact the following address:

WIKA Alexander Wiegand SE & Co. KG

Alexander Wiegand Strasse

D-63911 Klingenberg

Tel.

+49 - (0) 93 72 / 132-9986

Fax

+49 - (0) 93 72 / 132-217

E-mail: [email protected]

All integrated pressure sensors are calibrated.

The warranty period for the pneumatic high-speed pressure controller model CPC3000 is 24
months according to the general terms of supply of ZVEI.
All guarantee claims lapse if the system is put to improper use or if the operating instructions
are not observed or if an attempt is made to open the system.

We also point out that the contents of these operating instructions does not form part of an
earlier or existing agreement, assurance or legal relationship or is meant to change these. All
obligations of WIKA Alexander Wiegand SE & Co. KG result from the respective sales contract
and the general business terms of WIKA Alexander Wiegand SE & Co. KG.

WIKA is a registered trade mark of WIKA Alexander Wiegand SE & Co. KG. All other brand
and product names are trademarks or registered trademarks of their respective companies.

We reserve the right to effect reasonable changes on the basis of technical improvements.

Any reproduction of this manual or parts thereof by any means is prohibited.

Version key regarding firmware and respective manual

Manual

Firmware

V1.1

V 1.0