Kramer Electronics VS-6464DN - Manual (Page 9)

Defining the VS-6464DN 64x64 Digital Matrix Switcher
5
5
3.3 Recommendations for Best Performance
To achieve the best performance:
• Use only good quality connection cables to avoid interference,
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
• Do not secure the cables in tight bundles or roll the slack into tight
coils
• Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer VS-
6464DN away from moisture, excessive sunlight and dust
3.4 Redundant Power Supplies
The VS-6464DN is supplied with three power supplies accessible from the
front of the device (see Figure 1 ) and which are held in place with thumb-
screws. The power supplies operate in a redundant mode whereby the
failure of any one power supply does not cause the device to stop operating.
Note: The device must have at least two working power supplies to operate
correctly.
4 Defining the VS-6464DN 64x64 Digital Matrix Switcher
Figure 1 , Table 1 , Figure 2 and Table 2 define the front panel of the
VS-6464DN.