1 using the ir transmitter, Using the ir transmitter, Table 3: vs-6464dn – Kramer Electronics VS-6464DN User Manual
Page 13: 64x64 digital matrix switcher rear panel features, Table 3

Defining the VS-6464DN 64x64 Digital Matrix Switcher
9
9
Table 3: VS-6464DN 64x64 Digital Matrix Switcher Rear Panel Features
#
Feature
Function
22 Video Generator Output Connector
Connect to one of the relevant video inputs to aid in
troubleshooting (see
Section 10.4
23 PATTERN Button
Press the button repeatedly to change the video pattern
generated by the video generator (see
Section 10.3
24 RESOLUTION DIP-switches
Set the resolution for video generated by the Test module
(see
Section 10.2
25 IN 1~32 Connectors
INPUTS
Connect to the relevant video sources, depending on the
cards installed (1 to 32, see
Section 6
26 IN 33~64 Connectors
Connect to the relevant video sources, depending on the
cards installed (33 to 64, see
Section 6
27 AC Mains Power Module
Fuse holder and power cord socket. Connect to the AC
mains supply
28 RS-232 9-pin D-sub Port
Connects to the remote operation PC or remote controller
(see
Section 6.1
29 NET Ethernet RJ-45 Connector
Connect to a PC or controller via the Ethernet LAN (see
Section 6.3
The LINK LED flashes when communication is active.
POWER LED lights when the interface receives power
30 OUT 1~32 Connectors
OUTPUTS
Connect to the relevant video acceptors, depending on the
cards installed (1 to 32, see
Section 6
31 OUT 33~64 Connectors
Connect to the relevant video acceptors, depending on the
cards installed (33 to 64, see
Section 6
4.1 Using the IR Transmitter
You can use the RC-IR3 IR transmitter to control the machine via the
built-in IR receiver on the front panel.