Kramer Electronics VS-6464DN - Manual (Page 21)

Operating Your Video Matrix Switcher
17
17
7 Operating Your Video Matrix Switcher
This section describes:
• The startup display (see Section 7.1 )
• Using the selector buttons (see Section 7.2 )
• Confirming actions (see Section 7.3 )
• Switching options (see Section 7.4 )
• Locking the front panel (see Section 7.5 )
7.1 Startup Display
After switching on the power, the LCD display 1 shows the following
screens in sequence.
Figure 8: Default Startup Status Display Sequence
The front panel of the VS-6464DN includes a numeric keypad within the
selector buttons area 2
7.2
. This keypad lets you enter both the output and input
numbers as well as various numeric configuration values (see Section ).
When the unit is powered-on, the last matrix setup that was used is loaded.
Use either the recall setup 3 8.1.6 (see Section ) or default setup recall 4
7.4.5
(see
Section ) functions to retrieve other setups.
7.1.1 Viewing the Display
Figure 8 shows the output-input matrix on the LCD display. The LCD
display can show 13 out of the 64 available matrix combinations at once. To
1 The text in the LCD Display may vary (according to machine settings)
2 See
Table 1
3 Records a stored configuration from a preset
4 For quick retrieval you can program a default setup that is commonly used