2 connecting to the vs-6464dn via rs-232, 3 connecting to the vs-6464dn via ethernet, 1 connecting the ethernet port directly to a pc – Kramer Electronics VS-6464DN User Manual
Page 18: Connecting to the vs-6464dn via rs-232, Connecting to the vs-6464dn via ethernet, Connecting the ethernet port directly to a pc, On 6.3
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VS-6464DN 64x64 Digital Matrix Switcher
14
6.2 Connecting to the VS-6464DN via RS-232
You can connect to the VS-6464DN via an RS-232 connection using, for
example, a PC. Note that a null-modem adapter/connection is not required
To connect to the VS-6464DN via RS-232:
•
Connect the RS-232 9-pin D-sub rear panel port on the VS-6464DN
unit via a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and
pin 5 to pin 5 need to be connected) to the RS-232 9-pin D-sub port
on your PC
6.3 Connecting to the VS-6464DN via Ethernet
You can connect the VS-6464DN via Ethernet using a crossover cable (see
Section 6.3.1
) for direct connection to the PC, or a straight through cable
(see
Section 6.3.2
) for connection via a network hub or network router
6.3.1 Connecting the Ethernet Port directly to a PC
.
You can connect the Ethernet port on the VS-6464DN to the Ethernet port
on your PC via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identification of the factory default
IP Address of the
VS-6464DN during the initial configuration
To configure your PC after connecting the Ethernet port:
1. Right-click the My Network Places icon on your desktop.
2. Select Properties.
3. Right-click Local Area Connection Properties.
4. Select Properties.
The Local Area Connection Properties window appears.
5. Select the Internet Protocol (TCP/IP) and click the Properties
Button.
1 Note that some early devices require a null modem
2 After connecting the Ethernet port, you have to install and configure your Ethernet Port. For detailed instructions, see the
Ethernet Configuration Guide (L