Kramer Electronics VS-6464DN - Manual (Page 28)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the Configuration Menu
24
Note: It is necessary to have a display/device connected to the output from
which you want to read the EDID. Failure to do so results in the default
EDID being written to storage.
To assign an EDID to between one and eight inputs:
1. Press MENU.
The Setup Menu options are displayed.
2. Press 7 (EDID) on the numeric keypad (see Figure 2 ).
The following is displayed:
SETUP EDID
ENTER to View EDID and Set EDID
3. Press ENT.
The current EDID matrix configuration is displayed.
4. Using the numeric keys, enter the input in which to store the EDID (in
this example, 08), and enter the output (in this example, 05) from
which to read the EDID.
The following is displayed:
00 01 02 03 04 05 06 07 08
05 out05 =>
in08
The TAKE button flashes.
5. Repeat Step 4 for up to eight inputs.
6. Press TAKE.
The EDID is stored and passed through to the input.
The display reverts to the output/input display.
7. Repeat the above steps for th next batch of eight EDID assignments.
To view the EDID assignments:
1. Press MENU.
The Setup Menu options are displayed.
2. Press 7 (EDID) on the numeric keypad (see Figure 2 ).
The following is displayed:
SETUP EDID
ENTER to View EDID and Set EDID
3. Press ENT.
The current EDID matrix configuration is displayed. In this example,
input 07 is assigned to output 05, all other EDID values are default.
05 06 07 08 09 10
05
8.1.4 Setup Menu—9: Delay, Setting for an Output
Some displays require a delay in the negotiation of data between the display
and the switcher for reliable negotiation of data between them. This option