7 config menu—total matrix reset, Config menu—total matrix reset, N 8.2.7 – Kramer Electronics VS-6464DN User Manual
Page 34

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the Configuration Menu
30
4. Press TAKE.
The following is displayed:
current matrix stage
store as DEFAULT setup
•
This indicates that the current setup is stored as the default setup.
After a few seconds the next option on the Config Menu is displayed.
8.2.7 Config Menu—Total Matrix Reset
This option lets you turn all outputs off or reset the unit to its factory default
settings.
To reset the matrix setup:
1. Press MENU twice.
The following message is displayed:
start configuration menu
MENU to view setup ENT to change them
2. Press MENU until the following is displayed:
TOTAL MATRIX RESET
exit = ESC ENT = submenu
3. Press ENT to enter the Reset Submenu.
The following is displayed:
COMPLETELY MATRIX RESET
1:ALL outputs OFF 2:Factory default
4. Press 1 to turn off all outputs or 2 to perform a factory reset of all
options.
Caution: Selecting option 2 to perform a factory default reset clears all
setups, options and configuration.
5. Press TAKE and wait a few seconds.
The following is displayed:
Are you Absolutely sure !!!
Once more TAKE to confirm
6. Press TAKE.
The following is displayed:
Matrix erased!!!
Please, wait …
The matrix and device configuration are erased. After a few seconds the
next option on the Config Menu is displayed.