3 setting the pattern of the generated video, Setting the pattern of the generated video, Figure 9: resolution dip-switch – Kramer Electronics VS-6464DN User Manual
Page 37: N 10.4, On 10.3, Table 6

Using the Video Generator to Troubleshoot Video Problems
33
33
Table 6: Available PC Resolutions for Generated Video (Jumper off)
DIP-switch Position
Resolution
1
2
OFF
OFF
1024 x 768 @60Hz
ON
OFF
1280 x 1024 @60Hz
OFF
ON
1600 x 1200 @60Hz
ON
ON
1920 x 1200 @60Hz
Table 7: Available HD Resolutions for Generated Video (Jumper on, default)
DIP-switch Position
Resolution
1
2
OFF
OFF
480p (default)
ON
OFF
720p
OFF
ON
1080i
ON
ON
1080p
shows the Resolution DIP-switch with both switches in the default
off position, (up, 480p).
Figure 9: Resolution DIP-switch
10.3 Setting the Pattern of the Generated Video
The Pattern button is used to set the pattern of generated video. There are 32
available patterns. Press the button repeatedly to cycle through the patterns.
10.4 Using the Video Generator to Troubleshoot Video Problems
The video generator may be used in various ways to isolate video problems.
The following examples are based on the signal paths shown in
and a
VS-6464DN device installed as follows:
•
32 inputs and 32 outputs
•
The test module is installed and configured (see
Section 10.1
•
33 configured inputs and 33 configured outputs (see
Section 9