Festo Кабели и принадлежности - Manual (Page 79)

5.3 Diagnosis via WinPISA
In WinPISA you can read out the set parameters of the
field bus module as well as further status information as
follows [Register: Field bus]:
Fig. 5/2: Status display of the field bus module in
WinPISA
Status of Message/meaning
Connection Offline (no physical connection to the INTERBUS)
or
Bus inactive (there is a connection, but no data exchange)
or
Bus active (data exchange takes place with the field bus master)
Bus address No significance with INTERBUS
Baud rate Current baud rate (up till now fixed at 500 kBit/s, later extension
possible)
I/O assignment The process data of the field bus module on the INTERBUS
parametrized via WinPISA.
Software version Current version of the field bus module SPC200-COM-IBS
5. Diagnosis and error treatment
SPC200-COM-IBS 0503a 5-5