Festo Кабели и принадлежности - Manual (Page 37)

4.1 Procedure for commissioning
In order to commission an SPC200 mit integrated field
bus module, you will require the WinPISA software
package as from version 3.X.
Recommendation
Proceed with commissioning as follows:
1. Create and save the desired hardware configuration
(incl. field bus module).
2. First commission the individual axes with the aid of
WinPISA, but without using the field bus interface.
After reading this chapter, refer to the WinPISA
manual.
3. Then start commissioning the field bus.
4. Commissioning
SPC200-COM-IBS 0503a 4-3