Festo Кабели и принадлежности - Manual (Page 48)

4.2.3 Addressing variants on the INTERBUS
The SPC200 with field bus module SPC200-COM-IBS
supports the following addressing variants, depending
on the INTERBUS module and PLC used:
– configuration via CMD software (Chapter 4.3.1)
– logical addressing (Chapter 4.3.2)
– physical addressing (Chapter 4.3.2)
PLEASE NOTE
The I/O addresses for the bus slaves are set on the
INTERBUS module by switch or by software.
Address settings on the field bus module of the
SPC200 are not necessary.
4. Commissioning
4-14 SPC200-COM-IBS 0503a