Festo Кабели и принадлежности - Manual (Page 18)

A system with the above-mentioned modules offers the
following scope of performance:
•
control of up to two pneumatic axes.
•
programming and diagnosis via a PC or an operating
panel.
•
Coordination with external PLC/IPC via field bus.
With field bus module type SPC200-COM-IBS, the
SPC200 can be connected as a remote bus slave on
the INTERBUS.
The SPC200 can be controlled via the INTERBUS in
the operating modes start/stop or record select. The
field bus module provides the address range required
for this.
1. System summary
1-6 SPC200-COM-IBS 0503a