Festo Кабели и принадлежности - Manual (Page 43)

4.1.3 Configuring the I/O range for INTERBUS
An I/O range must be configured in the field bus mo-
dule for communication on the INTERBUS. The size of
the I/O range to be set depends on the selected opera-
ting mode of the SPC200. Proceed here as follows:
•
Open the dialogue window “SPC200 configuration”
•
Select SPC200-COM-IBS by clicking
©
Configuring field bus module SPC200-COM-IBS for
INTERBUS
Fig. 4/3: Dialogue window for SPC200 configuration
4. Commissioning
SPC200-COM-IBS 0503a 4-9