Festo Кабели и принадлежности - Manual (Page 26)

2.1 Fitting and removing the field bus module
CAUTION
Incorrect handling can damage the modules.
Do not, therefore, touch the contacts on the modules.
Please observe the regulations for handling electro-
statically vulnerable components.
Before fitting or removing modules, discharge yourself
electrostatically, in order to protect the modules from
discharges of static electricity.
The slots are numbered 1 to 6 from left to right. Slot 1
is reserved for the power supply module (type SPC-
200-PWR-AIF). The field bus module can be fitted as
desired in slots 2 to 6. If the field bus module is fitted
next to the diagnostic module, a control panel cannot
be plugged in because of the field bus cable.
Individual identification of all the modules fitted is car-
ried out automatically. Only 1 field bus module may
be fitted.
The modules are fixed onto the rack with the aid of a
safety catch. A tool is not therefore required for fitting or
removing the modules.
2. Fitting
2-4 SPC200-COM-IBS 0503a