Festo Кабели и принадлежности - Manual (Page 34)

General installation instructions and earthing
•
Connect the SPC200 as a remote bus slave to the
INTERBUS. The SPC200 cannot be used as an in-
stallation remote bus.
•
The SPC200 must be connected non-floating to the
INTERBUS.
- With ready-to-use cables make sure that
there is a contact via the plug connectors
(metal plugs) used.
- If necessary, connect the screening of the
incoming and of the continuing INTERBUS cables
directly to the housing of the metal plug.
•
Use low-impedance earthing or, if necessary, poten-
tial equalization cables.
3. Installation
3-6 SPC200-COM-IBS 0503a