Festo Кабели и принадлежности - Manual (Page 32)

3.2 Connecting the INTERBUS interface
CAUTION
Observe the basic instructions for setting up and
installing an INTERBUS in the relevant manuals for
your IBS module/master or in the INTERBUS
installation manual from Phoenix Contact.
Phoenix Contact installation manual:
Article:IBS SYS INST UM
Order no. 27 54 28 6
*)
There are two Sub-D plugs on the field bus module to
enable the SPC200 to be connected to the INTERBUS.
These serve for the incoming cable (plug) and for the
continuing INTERBUS cable (socket).
Recommendation:
Use the cables from Phoenix Contact. These are the
correct standard cable type with suitable 9-pin SUB-D
plugs/sockets, e.g.:
IBS RBC/1/1/length in m
*)
*)
Obtainable from:
Phoenix Contact GmbH & Co.
Postfach 1341
D-32 819 Blomberg, Germany
3. Installation
3-4 SPC200-COM-IBS 0503a