Festo Кабели и принадлежности - Manual (Page 77)

5.1 General instructions on diagnosis
Information on general diagnosis and error treatment
can be found in the user manual for the SPC200 order
no. P.BE-SPC200-GB. This chapter contains informa-
tion on diagnosing the field bus module as well as diag-
nosis and error treatment with the INTERBUS.
Summary of diagnostic possibilities
The SPC200 offers the following possibilities of diag-
nosis and error treatment:
– The LEDs on the SPC200 and on the connected field
devices show directly configuration errors, hardware
errors, string errors, bus errors, etc.
– The control panel shows detailed error messages
coded in the form of an 8-figure hexadecimal num-
ber. In online mode WinPISA shows the 8-figure
error messages as well as a description of the error
in clear text.
– Several error messages and statistics on the bus
connection can be read out on the INTERBUS via
the module (see manual for the CMD software or the
IBS plug-in module).
– The output bit READY (Q10.0) shows the basic sys-
tem readiness by means of the internal I/Os of the
field bus module.
5. Diagnosis and error treatment
SPC200-COM-IBS 0503a 5-3