Festo Кабели и принадлежности - Manual (Page 7)

Designated use
The field bus module type SPC200-COM-IBS has been
designed for connecting the SPC200 to the INTERBUS.
With this field bus module the SPC200 can be operated
as a slave on the remote bus.
The basic components and modules for the SPC200
are described in the User Manual type P.BE-SPC200-...
You must observe at all costs the safety precautions
described therein as well as the designated use of the
individual components and modules. Please observe
also the notes on safety in the operating instructions for
the pneumatic components used. The SPC200 as well
as the modules and cables to be connected may only
be used as follows:
– as intended
– in their original state
– without any modifications
– in perfect technical condition
If used with additional commercially-available compo-
nents, such as sensors and actuators, the specified
limits for pressures, temperatures, electrical specifica-
tions, torques, etc. must be observed. Local and na-
tional technical regulations must also be observed.
SPC200-COM-IBS 0503a V