Connections and installation, Mechanical installation – NOVUS V1.5x A User Manual

Page 4

Text mode
Original mode

NOVUS AUTOMATION

www.fieldlogger.net

4/103

CONNECTIONS AND INSTALLATION

MECHANICAL INSTALLATION

FieldLogger chassis can be installed on a 35 mm DIN rail.

For the installation on the rail, you must pull out the two clamps located right below the connections of the channels,
taking care not to remove them, as per Fig. 01.

Note: If necessary, the connector may be removed for installation of DIN rail.

Fig. 01 - DIN rail installation

Afterwards, fit the FieldLogger to the rail according to Fig. 02.

Fig. 02 - DIN rail installation