NOVUS V1.5x A - Manual (Page 14)

NOVUS AUTOMATION www.fieldlogger.net 14/103
CONNECTIVITY RESOURCES
Fig. 20 - FieldLogger connectivity resources
USB Connection
Interface used for a USB drive connection, for downloading data from the logging memory.
PC Connection
Interface used for connection to a computer for configuration, monitoring or data download.
SD card connection
Interface used for SD card expansion. The data from the logging memory can be transferred
by any of the interfaces to the configuration software, which allows the exportation for the
most diverse data formats.
Ethernet
Interface used for Ethernet 10/100 communication. It is recommended to use a category 5 (or
better) cable in a RJ45 connector.
The Ethernet connector of the FieldLogger has two LEDS for luminous indication: the green
LED (on the left side) lights indicating the connection to the Ethernet network; the yellow LED
(on the right side) flashes indicating that there is data traffic in the interface.
DB9 connection for HMI (Optional)
Connection for installation of HMI (Human–Machine Interface) of the FieldLogger for
indication of signals measured in the process. From firmware version 1.20 on, it can be used
as a generic RS485/Modbus RTU (slave) port.