NOVUS AirGate-Modbus User Manual
Airgate-modbus, Instructions manual, V1.1x c
AirGate-Modbus
NOVUS AUTOMATION
1/22
AirGate-Modbus
INSTRUCTIONS MANUAL
V1.1x C
INTRODUCTION
AirGate-Modbus is an equipment with a link interface function between a network with Modbus RTU protocol about
RS485 and a wireless network with proprietary protocol about IEEE 802.15.4. Resulting from an advanced technological
development, the product stands out in many aspects, such as high performance, high connectivity and easy setup and
operation. This technology is presented as the ideal solution for applications which require flexibility and interoperability.
Its main characteristics are:
•
SMA connector for antenna;
•
2 dBi antenna;
•
Two connectors for one RS485 Modbus RTU interface;
•
USB Device (Mini-B);
•
Status indicator LEDs;
•
Button used to enter setup mode.
Document Outline
- INTRODUction
- SPECIFICATIONS
- CONNECTION AND INSTALLATION
- operation
- OPERATION MODES
- USING THE OPERATION MODES
- LONG REACH APPLICATION
- SETUP SOFTWARE
- CONFIGURATION MODES
- DETERMINATION AND SELECTION OF THE SERIAL PORT (COM) - WINDOWS
- CONFIGURATIONS - AIRGATE-MODBUS
- BASICS
- PAN ID
- modbus ADDRESS
- Each AirGate-Modbus must have a unique Modbus address. This address should be set before connecting the device to the network. Modbus communication frames addressed to AirGate-Modbus will be handled by itself. Frames with any other address will be for...
- This address is set in factory as 248, an invalid Modbus address, to avoid initial conflict with any other already configured Modbus device in the network and should be changed to a unique address as soon as possible. While in Configuration Mode (stat...
- Baud rate
- PARITY
- Timeout
- OPERATION MODES
- ADVANCED
- FIRMWARE UPDATE
- BASICS
- DATA COMMUNICATION - SERIAL
- data communication – Wireless
- MODBUS commands
- DESCRIPTION OF SOME REGISTERS
- HOLDING REGISTERS TABLE
- SUPPORTED MODBUS REGISTERS
- ACCESSORIES
- WARRANTY