Panasonic -eng - Manual (Page 11)

11
Continued on next page
Start Windows.
Connect the IC recorder to the computer using the USB cable.
Connect one IC recorder only while using Voice Editing. This software does not support simultaneous use
of multiple IC recorders.
Use the cable supplied with the IC recorder. Use of devices other than the supplied accessories can
damage the product.
Do not use the supplied cable with other devices.
Be careful when inserting devices into or removing devices from the USB terminal of the IC recorder unit.
If a device is forcibly inserted at an angle or the wrong way around, the terminal could deform and cause a
malfunction of the IC recorder or connected device.
When connecting the IC recorder and computer via the USB cable, stop IC recorder operation and switch
the IC recorder to “HOLD.”
The IC recorder unit cannot be operated while it is connected to a computer with the USB cable.
Voice Editing recognizes IC recorders and USB Reader/Writers as drives but Windows does not recognize
IC recorders as drives.
Use a USB Reader/Writer or PC card adapter to connect an SD Memory Card.
Connecting the IC recorder
Insert straight in with
USB symbol facing
downward.
Align
the pin
orientation.
Slanted
USB symbol facing
upward
= Correct
= Incorrect