Changing the rapid wake (sleep mode) settings, User guide – Sony SVF1432ACXW User Manual

Page 367

Personal Computer

VAIO Fit 14E/15E

SVF1432/SVF1442/SVF1532/SVF1542

Changing the Rapid Wake (Sleep Mode) Settings

You can change the Rapid Wake settings in

VAIO Control Center.

Rapid Wake is enabled by default. With this function, your VAIO enters Sleep mode after your working data is saved on

the built-in storage device.

1. Start

VAIO Control Center and select Hardware. (See

Starting Apps

to start

VAIO Control Center.)

2. Enable/disable the setting in

Rapid Wake.

Note

With Rapid Wake disabled:

Your working data is not saved on the built-in storage device when your VAIO computer enters Sleep mode. Therefore, if
the computer is turned off during Sleep mode because, for example, the battery pack runs out of power or the computer is
disconnected from an AC power source, the working data will be lost. To avoid data loss, be sure to save the data before
the computer enters Sleep mode.

If your VAIO computer is equipped with the power indicator, it blinks slowly in orange during Sleep mode. When the
battery pack runs out of power during Sleep mode, the charge indicator light blinks. If the computer is equipped with the
power indicator, it blinks along with the charge indicator.