Changing the sound output device, User guide – Sony SVF1432ACXW User Manual

Page 292

Personal Computer

VAIO Fit 14E/15E

SVF1432/SVF1442/SVF1532/SVF1542

Changing the Sound Output Device

If there is no sound coming from an external device connected to your VAIO computer, you need to change the device

for sound output.

1. Open

Control Panel and select Hardware and Sound. (See

to open

Control

Panel.)

2. Select

Sound.

3. Select the

Playback tab.

4. Ensure there is a check mark next to the icon of the device you intend to output computer sound from.

If there is no check mark next to the icon, select it and

Set Default.

5. Select

OK.

To change the sound rate and bit depth

The sound rate and bit depth of the digital audio output signal should be set according to your digital audio device.

Follow the above steps 1 to 3, and then select the HDMI device icon and

Properties. On the Advanced tab, select

the sample rate and bit depth (for example, 16 bit, 48000 Hz (DVD quality)) which the device supports, and then

OK.