Allied Telesis AT-S10 TurboStack - Manual (Page 68)

Software Upgrades
58
TFTP
If you have a TCP/IP network, you can use TFTP to send or get the latest
software. The source can be a TurboStack hub with the latest software or
Allied Telesyn’s Bulletin Board Services or web site. Check these services
for the latest software (the image file) and the steps to download them.
Following are examples of TFTP commands.
To obtain a current image file, use the following command format:
tftp get ATS10 octet
To download a current image file, use the following command format:
tftp put ATS10 octet
You supply the IP address of either the file’s source or destination. ATS10
is the download password, and octet indicates that the file you are
downloading is binary.
ATTENTION
The download password, ATS10, must be in uppercase.