Allied Telesis AT-S10 TurboStack - Manual (Page 17)

AT-S10 Management Software User’s Guide
7
Assigning a Hub
Name
While specifying an IP or MAC address is enough to communicate with
the hub, names are more descriptive and easier to remember. For the
same reason, plan to assign names to ports as well (described later in
Chapter 3).
To name the hub:
1. Enter A for Administration from the main menu to get the
following screen :
2. Enter H for Hub name .
The following menu appears:
3. Enter the hub name, for example, Sunnyvale.
From now on, the name appears at the top of the menus.
You are done naming the hub. Through Omega, you can now connect to
this hub by specifying its name.
CAUTION
Make sure each hub name is unique because the software does not validate
duplicate hub names. If you use duplicate names, you might inadvertently
connect, reconfigure, or download software to the wrong hub.
Please select an option:
Hub name
Module name
Omega Options
Network parameters
Terminal configuration
Language/langue/idioma/linguaggio/sprache
Send updated software to another hub
Update software in all hubs
Reset hub configuration to manufacturing defaults
Activity monitor
EtherMeter
Diagnostics
Connect to a remote hub
->
The Hub’s current name is:
Null (not currently configured)
Please enter a new name, or Return to retain the existing name:
->