Hub ip address, Sunnyvale, All modules in the chassis inherit this address. t – Allied Telesis AT-S10 TurboStack User Manual

Page 48: Subnet mask, Gateway address, Hub ip address subnet mask gateway address

Management Menus

When configuring network parameters for the hub, the software warns
you if you enter a wrong address format. You must then press

Return

to go

back to the

Network parameters

screen.

Hub IP Address. Enter A to display the

Hub IP address

screen as

shown:

Then enter the IP address for the hub.

CAUTION

All modules in the chassis inherit this address. This may result in
duplicate IP addresses if you use one of the modules as a standalone hub in
the future. Remember to change that hub’s IP address when it becomes a
standalone hub.

Subnet Mask . Enter B to display the

Subnet mask screen

as shown:

Then enter the Subnet mask if any.

Gateway Address. Enter C to display the

Gateway address

screen as

shown:

Then enter the address of the default gateway (router) to be used by the
hub when transmitting packets to another network or subnetwork.

Sunnyvale

The current Hub IP Address is:
Null (not currently configured)

Please enter a new value, or Return to retain the existing one.
Enter a value in the form of a.b.c.d, where a, b, c, and d are each in
the range 0-255. For example: 128.9.3.1

Sunnyvale

The current Subnet Mask is:
Null (not currently configured)

Please enter a new value, or Return to retain the existing one.
Enter a value in the form of a.b.c.d, where a, b, c, and d are each in
the range 0-255. For example: 255.255.255.0

Sunnyvale

The current Gateway Address is:
Null (not currently configured)

Please enter a new value, or Return to retain the existing one.
Enter a value in the form of a.b.c.d., where a, b, c, and d are each in
the range 0-255. For example: 128.9.3.1