Allied Telesis AT-S10 TurboStack - Manual (Page 11)

1
Chapter 1
Overview
This chapter describes:
❑ The features of AT-S10 and the management agent Omega
❑ An overview of Turbo Stack hub configurations in relation to hub
management
❑ Information on managing a Turbo Stack hub on your network
❑ The interoperability of the AT-S10 software with AT-S4
Software Features
Figure 1 shows the 12-port AT-TS12TR TurboStack hub.
Each manageable hub is factory-configured with the AT-S10 software and
has the following software features:
❑ IEEE 802.3 compliance; Ethernet Version 1.0 and 2.0 compatible
repeater functionality
❑ Two types of network management capability:
— SNMP
— Omega via ASYNC ASCII terminal port (Omega Local™) or
Telnet (Omega Remote™)
Figure 1: AT-TS12TR
Turbo Stack Hub