beautypg.com

To reinstall or update the management agent using, Remove the master from the chassis if this is a, When removing any department concentrator module – Allied Telesis AT-S10 TurboStack User Manual

Page 65: Unplug the hub’s power cord, Be sure to unplug the hub’s power cord before inst, Locate the blank cover plate on the firmware ca, Turn the thumbscrews counterclockwise until the, Slide the firmware cassette into the port, firm, Plug the power cord into the hub, Unplug the hub and remove the software cassette

To reinstall or update the management agent using, Remove the master from the chassis if this is a, When removing any department concentrator module | Unplug the hub’s power cord, Be sure to unplug the hub’s power cord before inst, Locate the blank cover plate on the firmware ca, Turn the thumbscrews counterclockwise until the, Slide the firmware cassette into the port, firm, Plug the power cord into the hub, Unplug the hub and remove the software cassette | Allied Telesis AT-S10 TurboStack User Manual | Page 65 / 78 To reinstall or update the management agent using, Remove the master from the chassis if this is a, When removing any department concentrator module | Unplug the hub’s power cord, Be sure to unplug the hub’s power cord before inst, Locate the blank cover plate on the firmware ca, Turn the thumbscrews counterclockwise until the, Slide the firmware cassette into the port, firm, Plug the power cord into the hub, Unplug the hub and remove the software cassette | Allied Telesis AT-S10 TurboStack User Manual | Page 65 / 78
See also other documents in the category Allied Telesis Computer hardware: